Secondary/ Defective & Over Rolled Material


PRIMARY, SECONDARY / DEFECTIVE AND OVER ROLLED MATERIAL

PRIMARY
These are made as per the ordered quantities.

Defective Coils
Ask For Price
SECONDARY / DEFECTIVE
While producing the primary products, it is common in the mills to have problems in the production line / process on many aspects, which could be the chemistry, surface, edges, lamination, pits, rusting or any other problem. Hence, material with defects and not adhering to specific quality norm is traded on secondary / defective.

GALVANIZED SHEETS / COILS
PLATES
END CUTTING / SIDE SHEARINGS OF PLATES
HR/CR COIL ENDS
HR COILS / SHEETS
CR COILS / SHEETS
PIPES
SEMIS
BEAMS & STRUCTURE
DEFORMED BARS
FERRO ALLOYS

GALVANIZED SHEETS AND COILS
Ask For Price

Plates
Ask For Price

HR Coils
Ask For Price
GALVANIZED SHEETS / COILS
The material being traded varies from thickness of 0.15 mm to 4 mm duly galvanized, as per customer’s desired specifications.

This items is also dealt in sheet form as per customer’s specific requirement.

PLATES
We are trading in plates from 5 mm thickness to 300 mm thickness and width from 1000 mm to 4500 mm depending upon the thickness, width and of desired length and of course the technicality of rolling the desired sizes are achieved.

The material that we are trading is procured from mills adhering to any international specifications, may it be American standard (API), British Standard.

END CUTTING / SIDE SHEARING OF PLATES
Plates while being rolled are bigger than the ordered size. Hence to achieve the exact ordered size, the metal is doubly cut, thereby leaving the cuttings in both width and the length. The same may be from 500 mm to any length and the width could be from 200 mm to any, for us to trade in it.

HR/CR COIL ENDS
While processing the HR the ends are usually discarded. Similarly to establish the quality in CR, the ends are discarded. The terminology is known as Head End or tail end, which is a part of our trading activity.

HR COILS / SHEETS
We trade in the same to suit the requirement of CR mills, pipe mills and trade. The thickness varies from 1.5 mm to 12 mm and width from 200 mm to 520 mm (narrow width coils) and upto 2000 mm also.

The above material can be in sheet form too.

BOX COILS
This is the special item we trade in, known as box coils having thickness upto 50 mm, supplied in coil forms in different widths. The normal coil weight may go upto 25 to 30 MT.

CR COILS / SHEETS
The size range that we trade is from 0.17 mm to 4 mm and width from 200 mm to 1700 mm. The coil width is a combination in thickness and width and weight can go upto 28 MT per coil.
The same is dealt in Sheet form too

PIPES
{short description of image} Welded (ERW)
We are also engaged in trading of ERW (Electric Resistance Welded) Steel Pipes, in different thickness as per IS, BS and American norms as per customer’s specification.
Pipes
Ask For Price

The size range would be maximum 500 diameter and thickness as per customers specific requirements. The same is applied in either black or galvanized condition.

The general industrial usages could be scaffolding, water transmission, irrigation, etc.

{short description of image} Seamless
We trade in all types of seamless pipes, dia. from 65 mm to 600 mm and thickness as per customer’s specification.

The general industrial usages could be scaffolding, water transmission, irrigation, oil refinery etc.

SEMIS
Billets
Ask For Price
Semi’s are traded in all international standards for rolling into wire rods, deformed bars, structure, forgings and other usages. The specifications are maintained as per individual customer’s needs.

The same is available from continuous casting routes as follows :
Billets – Size 100 X 100 mm, 150×150 mm billets.
Blooms – Size 160 x 160 mm to 900 x 900 mm.
Round Billets – Dia. From 140 mm to 400 mm
Slabs – Thickness from 70 mm to 300 mm and the width maximum upto 2000 mm and length as per specification.

DEFORMED BARS
Ask For Price

BEAMS & STRUCTURE
Are dealt in international standards from various mills. The size range starts from 100 mm and goes upto 900 mm. They are basically universal beams, I beam, parallel flange beams, H beams, etc.

DEFORMED BARS
The material is being traded as per desired international standards in the size 8 mm to 40 mm.

FERRO ALLOYS
Ask For Price
FERRO ALLOYS
Most commonly traded Ferro Alloys by us are Ferro silicon, Ferro-Chrome, Ferro-Manganese, silicon manganese.